The Best Places to Buy Microliter Ceramic Pump Online and In-Store

Peri-Star Pro peristaltic pumps provide accurate and precise pumping with convenience and versatility. Peri-Star Pro can be run in either flow rate mode (mL/min) or rotation speed mode (rpm). For good laboratory practice, pumps must be calibrated after changing the tubing and solution. You can easily calibrate Peri-Star Pro to deliver flow as accurate as 0.5% in a wide flow range from 0.1 - 280 mL/min. Under rotation speed mode, the digitally controlled stepping motor provides accurate and reproducible operation with 0.1% rpm both forward and in reverse.

Zmdy Ceramics supply professional and honest service.

Digital Peri-Star™ Pro peristaltic pump is affordably priced!

• Display either rotation speed (RPM) or flow rate (mL/min)
• Wide flow range: 0.1 - 280 mL/min
• Accuracy of flow rate: 0.5% using self calibration function
• Accuracy of speed: 0.1 rpm
• Large backlit digital LCD display
• Programmable for all tubing sizes between 0.8 mm and 6.4 mm ID
• Easy and fast tubing replacement using snap-on cartridges
• Membrane keypad allows easy programming while protecting controls from fluid entry
• Actively driven rollers by planetary gears for long lasting tubing life

Options

Order codeDescription# ChannelsRateHeadPERIPRO-8LSPeri-Star Pro Peristaltic Pump, small tubing8LowPERIPRO-4LSPeri-Star Pro Peristaltic Pump, small tubing4LowPERIPRO-4HSPeri-Star Pro Peristaltic Pump, large tubing4HighPERIPRO-2HSPeri-Star Pro Peristaltic Pump, large tubing2High

Benefits

• Backlit display with water resistant cover
• Easy setup and calibration with simple instructions on screen
• Both high and low flow pumps employ planetary gears for minimal pulsations and greater accuracy

Applications

• Chemical transfer
• Pharmaceutical processing

Accurate and precise pumping

Peri-Star Pro peristaltic pumps provide accurate and precise pumping with convenience and versatility. Peri-Star Pro can be run in either flow rate mode (mL/min) or rotation speed mode (rpm). For good laboratory practice, pumps must be calibrated after changing the tubing and solution. You can easily calibrate Peri-Star Pro to deliver flow as accurate as 0.5% in a wide flow range from 0.1 - 280 mL/min. Under rotation speed mode, the digitally controlled stepping motor provides accurate and reproducible operation with 0.1% rpm both forward and in reverse.

Backlit display with water resistant cover

Large backlit digital LCD display provides readouts of rotation direction, flow rate or rotation speed, tubing ID, drive status and remote control mode simultaneously. Water resistant membrane keypad allows easy programming while protecting LCD display and controls from fluid entry.

Easy setup and calibrate the pump

Built-in Human Machine Interface (HMI) with screen instructions in plain English steps you through initial setup, calibration and operating procedures. The user-friendly interface reduces the need to frequently check the printed manual for instruction and reference.

For more Microliter Ceramic Pumpinformation, please contact us. We will provide professional answers.

Unique planetary gears for accuracy

Peri-Star Pro is available in two versions: a 4-roller version for high flow and an 8-roller version for lower volumes while providing high pressure with minimal pulsations.

A unique planetary gear design with eight actively driven rollers (four rollers for higher flow rate model), together with independent tubing compression fine adjustment, enables the high flow accuracy and prolongs tubing life. Snap-on cartridges allow tubing to be changed quickly without cross contamination of solutions.

Single Channel

IVEK’s precision liquid dispensing rotary systems are capable of dispensing 1uL – 8mL within a second and operate either Single-End or Dual-End Motors giving you (1) or (2) dispenses at a time. Our high precision liquid dispensing linear systems are capable of linear flow from 2nL – 2mL.

Ivek's Metering and Dispensing Systems Handle A Volume Of Fluids

IVEK systems feature ceramic positive displacement pump heads coupled with a stepping motor drive that allows every metering and dispensing system to be highly precise, with flow rates from nanoliters and microliters to 9 liters/minute.

The ceramic materials used in these systems are extremely hard and resist abrasion. Ivek metering and dispensing systems show little to no wear, even after hundreds of millions of cycles.

Committed to Exceptional Quality and Customer Service

A deep commitment to manufacturing superior, quality products and outstanding customer satisfaction is our number one priority. The metering and dispensing systems that Ivek produces offer excellent performance and reliability for the most demanding applications. Our technical, engineering and support staff are always available to assist and provide you with the services you need to get the greatest benefit from our products.

Are you interested in learning more about Ceramic Filling Pump? Contact us today to secure an expert consultation!

IVEK Corporation is ISO and ISO certified.