Stucco Netting - Supporting Mesh in Wall Construction

SN-01: Stucco netting is widely used in the wall constructions.

Stucco netting is widely used in the wall constructions.

View Details

Stucco netting, a classical and basic material in wall construction as the supporting and reinforcing mesh. It is a kind of steel wire mesh with hexagonal meshes. The stucco netting is mainly made of galvanized steel wire and then reverse twisted into hexagonal meshes. The reverse twist structure make the stucco netting a solid, uniform and flat structure for high strength and durability. Reinforced wires can be added onto the stucco netting for higher load capacity and maintain flatness.

Compared with other type stucco netting, such as welded wire mesh or expanded metal mesh, the woven structure will not cracking and loosing when it is cut into pieces.

Stucco netting is widely used in various wall surface for plastering, cementing, stuccoing and other wall constructions.

Specifications of stucco netting

• Material: galvanized steel wire.
• Wire diameter: 0.6 mm to 2.0 mm.
• Structure: reverse twist.
• Mesh size: 13 mm - 50 mm
• Stucco netting width: 1.2 m - 2.5 m.
• Stucco netting length: 50 m, 100 m, 200 m.

Table 1: specifications of stucco netting Item Mesh size
(mm) Wire diameter
(mm) Roll width
(m) Roll length
(m) SNS-01 13 0.6, 0.7, 0.8, 1.0 1, 1.5, 2.0, 2.5 50, 100, 200 SNS-02 20 0.6, 0.7, 0.8, 1.0, 1.2 1, 1.5, 2.0, 2.5 50, 100, 200 SNS-03 25 0.6, 0.8, 1.0, 1.2, 1.4 1, 1.5, 2.0, 2.5 50, 100, 200 SNS-04 28 0.8, 1.0, 1.2, 1.4, 1.6, 1.8 1, 1.5, 2.0, 2.5 50, 100, 200 SNS-05 30 0.6, 0.8, 0.9, 1.0, 1.2, 1.4 1, 1.5, 2.0, 2.5 50, 100, 200 SNS-06 35 0.6, 0.8, 1.0, 1.2, 1.4, 1.6 1, 1.5, 2.0, 2.5 50, 100, 200 SNS-07 45 1.0, 1.2, 1.4, 1.8, 2.0 1, 1.5, 2.0, 2.5 50, 100, 200 SNS-08 50 0.6, 0.7, 0.8, 1.0, 1.2 1, 1.5, 2.0, 2.5 50, 100, 200

Features of stucco netting

• Galvanized wire for corrosion and rust resistance.
• Reverse twist for higher strength and durability,
• Reinforced wire for flatness and higher strength.
• Good adaption. It can be used with cement, stucco, masonry and other materials.
• Will not loose when it is cut into pieces.
• Lightweight and easy to install.
• Used in different wall surface, such as brick, soil, ceramic tile or veneer.

SN-02: Reinforced wire supplies higher strength and durability for stucco netting.

Reinforced wire supplies higher strength and durability for stucco netting.

SN-03: just place the stucco netting onto the wall and fasten them by tools.

just place the stucco netting onto the wall and fasten them by tools.

Applications of stucco netting

stucco netting is widely used as backing and reinforced mesh in wall constructions. It is widely used in the following wall applications:

• Cement.
• Plaster.
• Stucco.
• Masonry.
• Veneer.
• Ceramic tile.

SN-04: Stucco netting is used for brick wall reinforcement.

Stucco netting is used for brick wall reinforcement.

SN-05: Stucco netting is used for reinforced the house foundations.

Stucco netting is used for reinforced the house foundations.

Inquiry for Our Product

Hebei Lvhua Gabion Wall Co., Ltd.

Which Stainless Steel Cone Filter: Superior Taste or Easy Maintenance?
How does Hot Rolled Steel Coil differ from Cold Rolled Steel Coil?
Which Spray Pump Filters for Sale Provide the Best Cost-Effective Solution for My Business?
What are the advantages of Y type strainer?
Do I need a filter for a paint spray gun?
Inconel 625 vs Inconel 718: A Comparative Overview

:

When you contact us, please provide your detail requirements. That will help us give you a valid quotation.

Full Name

*

For more information, please visit Wusheng Hardware.

Additional reading:
The Ultimate Buyer's Guide for Purchasing welded wire mesh supplier

Address

*

Country Code

*

+ Number

*

Your Website

Message

*

This is prep for a stucco patch job&#; it looks wrong to me. The woven wire is tight to the tar paper leaving no room for stucco to surround it. The staples pull out easily and look like they will rust. And the staples are in the sheathing not the framing. Am I too picky here?

The California Building Code says to use ASTM C. ASTM C has notes:

*Table 3 Footnote: B (Woven Wire) Metal plaster bases shall be furred away from vertical supports or solid surfaces at least 1&#;4 in. Self-furring lath meets furring requirements.
*
Section 7.10.2.2 says &#;Staples shall have crowns not less than 3&#;4 in. (19.05 mm) and shall engage not less than three strands of lath and penetrate the wood framing members not less than 3&#;4 in.&#;

Cutting some slack for retrofit, what do you think?

The company is the world’s best SMOOTH STUCCO WIRE MESH supplier. We are your one-stop shop for all needs. Our staff are highly-specialized and will help you find the product you need.