10 Questions You Should to Know about Safety Shoes

Introduction

When it comes to safety in the workplace, the importance of donning the right footwear is often overlooked. Stepping into the right pair of safety shoes is not just about ticking a compliance box; it's about safeguarding your most fundamental base of support'your feet. From preventing injuries due to sharp objects, falls on slippery surfaces, or the impact of heavy materials, the right pair of safety shoes acts as a protective shield for your feet. Dive into our comprehensive FAQ, as we demystify the nuances of safety shoes, answering your top queries to ensure maximum foot protection. 

Jianlida contains other products and information you need, so please check it out.

What is the regulation for safety shoes? 

Safety shoes are essential in certain workplaces. Employers mandate that such footwear is worn consistently, even if no immediate hazard is present. These shoes should feature a leather upper, boast oil-resistant and non-skid soles, and adhere to ASTM -05 standards. Specifically, they must have an impact resistance and compression resistance rating both set at 75. 

Why do workers wear safety shoes? 

Workers wear safety shoes to prioritize their protection on the job. Much like other personal protective gear, safety footwear is crafted to mitigate injury risks and lessen injury severity. These shoes come equipped with essential features including slip-resistant soles, reinforced toes for impact protection, water-resistant materials, and supportive arch design. 

Do I have to wear safety shoes at work? 

If you're working in environments with hazardous materials, heavy objects, or potential foot injury risks, wearing safety shoes at work is essential for protection. 

What are the OSHA rules for shoes? 

While OSHA doesn't set explicit guidelines for wearing open-toe shoes in offices, their foot protection standard (29 CFR .136(a)) mandates protective footwear in work zones prone to foot injuries. This includes risks from falling objects, objects that could pierce shoe soles, or potential electrical hazards to the feet.  

What is the difference between safety boots and safety shoes? 

Safety shoes and safety boots serve protective purposes, but with distinct differences. Safety shoes tend to be more comfortable and are a preferred choice for those on their feet for extended periods. Their streamlined design and smaller size make them notably lighter than the bulkier safety boots.  

Are safety shoes good for feet? 

While safety shoes are crafted with robust materials to shield feet from job-related injuries, they can limit the foot's natural flexibility. Prolonged use may result in joint stiffness and consistent discomfort. 

What are the disadvantages of safety shoes? 

• Choosing the wrong shoe design for specific tasks. 
• Mismatch in shoe width or toe cap size. 
• Overbearing weight, making all-day wear challenging. 
• Unsuitable sole material lacking desired traits like anti-slip or anti-static. 
• Insufficient foot support leading to potential knee and back issues. 
• Dilemma between steel vs. composite toe caps, with one typically outperforming the other. 

Are safety shoes anti slip? 

Anti-slip features are common in safety shoes, designed specifically to reduce the risk of slips and falls on wet or oily surfaces. In accordance with DOSH Sirim PPE Regulations, genuine safety shoes are required to offer protection against such slippery conditions.  
 

Should safety shoes be tight or loose? 

Safety shoes should strike a balance ' neither overly tight nor too loose. They should offer a snug fit, akin to swaddling a baby, providing noticeable support without causing discomfort. 
 

Why are safety shoes so big? 

Safety shoes often fit larger due to their built-in hard cap, ensuring there's no stretch in the toe box. It's essential for your toes not to touch the shoe's end, hence they're designed about a half size bigger than regular footwear. 

Can you wear steel toe boots all day? 

While steel toe boots provide robust protection due to their steel construction, wearing them for extended periods might be less comfortable. The weight and rigid design can potentially lead to discomfort, bruises, and calluses on the feet. 

What is the difference between safety shoes and non slip shoes? 

Non-slip shoes are primarily designed to grip wet or slick surfaces due to their rubber soles and unique tread patterns. In contrast, safety shoes offer added protection beyond just slip-resistance, ensuring a safer and more stable work environment. 

Do safety shoes expire? 

Do safety shoes have an expiration date? Indeed, the majority of safety footwear comes with a recommended usage period of two years. It's crucial to wear them within this timeframe to prevent hydrolysis, a process that can compromise their integrity. 

What is the difference between safety shoes and normal shoes? 

What sets safety shoes apart from regular shoes? Safety shoes are enhanced with features like steel or composite toe caps, which while adding a bit more weight, provide vital protection against impacts. Additionally, the robust upper materials contribute to their distinct, sturdy feel compared to standard footwear. 

Are safety shoes anti slip? 

Do safety shoes offer anti-slip protection? Absolutely! Anti-slip safety shoes are specifically designed to guard against slips, trips, and falls on slick or oily terrains. In compliance with DOSH Sirim PPE standards, genuine safety footwear is equipped to ensure maximum grip on slippery surfaces. 

Are safety shoes fashionable? 

Can safety shoes be stylish? Definitely! Modern safety footwear offers a diverse range of designs, from sporty sneakers to formal dress shoes. They're perfect even for professionals like engineers who frequent safety-required zones. Plus, certain steel-toe shoe brands have gained popularity in trendy subcultures like punk, skinhead, and riverhead. 

How do safety shoes protect you? 

How do safety footwear shield you? Safety shoes provide essential protection against punctures, lacerations, thermal hazards, and impactful forces. Moreover, their enhanced traction minimizes the risk of slips and falls on uneven or slick terrains, safeguarding against severe injuries like fractures and concussions. 

What are the effects of safety shoes? 

How can safety footwear impact you? Inferior safety shoes can lead to injuries like sprains, blisters, corns, and even the risk of amputation. Moreover, incorrect or subpar footwear can compromise posture, potentially resulting in back discomfort. 

What is appropriate footwear for work? 

What footwear is best for workplace safety? At a minimum, workers should don durable shoes covering the entire foot up to the ankle, especially in areas demanding protective footwear. For risks involving dropping, compression, or crushing, consider shoes with removable safety toe caps/guards.  

Why is foot protection important? 

Why protect your feet at work? Foot protection is vital due to threats like falling objects, sharp materials, electrical risks, corrosives, heat, and slippery conditions. Each type of safety footwear offers specific defense mechanisms. 

Conclusion

Navigating the intricacies of safety footwear, it's evident that safety shoes are more than just an accessory; they're a necessity for many professions. From adhering to regulations such as ASTM -05 to offering paramount protection against potential foot hazards, the role of safety shoes in occupational settings cannot be overstated. With diverse designs catering to both protection and style, they serve as a blend of functionality and fashion. However, the efficacy of these shoes is only as good as their fit and appropriateness for the specific task at hand. As we've explored through the FAQs, choosing the right safety shoes not only ensures compliance with workplace regulations but also guarantees optimal foot protection, reducing the risk of injuries. In essence, when it comes to foot safety in high-risk environments, investing in the right pair of safety shoes is paramount. 

If you are just doing the safety shoe business or planning to do import safety shoes business.

After reading this guide you will be very clear what is the safety shoe standard and how to choose safety shoes in your field.

Here you can find a lot of knowledge about safety shoes that you didn't know.

What are Safety Shoes?

Safety shoes or safety boots are also called PPE (Personal Protection Equipment) for protecting feet at workplaces.

They prevent injuries due to splinters, chemicals, rope loops under tension, hot objects, rotary machinery, pinch points, and slippery surfaces.

Sharp piercing edges and heavy rolling or falling objects are included in the list.

What is Safety Shoes PPE?

The initials stand for Personal Protective Equipment.

It is equipment or clothing that protects workers from physical hazards at the workplace from head to toe.

Safety shoes are among the most important equipment.

What is Different Between Safety Shoes and Ordinary Shoes?

Safety shoes have different levels of protection and are often used in various industrial fields to achieve the purpose of protection.

Some of the safety shoes design style is from ordinary shoes, it looks the same, such as the sporty style, but in fact, the toe of safety shoes is relatively wide, because there is have a steel toe inside

Safety shoes are heavier than ordinary shoes because of the steel plate or steel plate.

How Many Safety Shoes are Export in China?

China leads the safety shoes manufacturing business.

There are 12.6 billion pairs of shoes produced each year.

The total production exceeds groups of exporters in other countries.

A strong currency, wage increases and paid overtime (that give domestic consumers increased discretionary income), and an extensive market help maintain a vast output.

Almost three-quarters of the 98 percent of shoes manufactured abroad come from China.

In , Chinese footwear revenue totaled $58.3 million.

The U.S. leads in sales, but the share of Asia's global shoe industry is 54 percent.

How Many Types of Safety Shoes are Made in China?

You can find any type of safety shoes in China

• Steel toe cap leather safety shoes

Steel toe leather safety shoes use in common workplace

• Lightweight steel toe construction work shoes

Light steel toe work shoes are a popular style in the light industry.

• Men and women sport safety shoes

Sport safety shoes become very popular among young men and women in the safety footwear industry

• Police and military safety shoes

Sometimes the military often has dangerous missions that require protective boots.

• Wear-resistant combat boots

Combat boots with a waterproof upper will keep your feet dry when training in the rain or jungle.

• Safety gumboots

Safety gumboots made of PVC materials or rubber materials, Steel toe and midsole with steel plate protection

• Woodland safety shoes

Woodland safety shoes made of the protective toe and insert anti-nail plate, it's all the range in outdoor

• Waterproof safety shoes

Waterproof safety shoes have a waterproof membrane lining that you can walk in the water without getting wet.

• Velcro safety shoes

Velcro design for safety shoes easy take on and take off

• Mate free safety shoes

Metal-free safety shoes are made of the plastic toe and eyelets, a midsole made of non-metallic fabric

• Electrical Safety Shoes

Essential standard safety footwear for the power industry, including conductive, insulated shoes, insulation range 8-36KV

• Food Safety Shoes

Often used in food processing plants, mostly white in color, basically reach up to S2 standard or higher.

• Office Safety Shoes

Office safety shoes are used by the executive manager who always to inspection the work ground.

• Metatarsal safety shoes

Metatarsal safety shoes popular in the Canada and U.S. markets, where workers believe that in addition to protecting their feet toe, the backs of their feet are also important.

You also could OEM safety shoes in China manufacturer

Video about safety shoes made in China:

What is Cost Import Safety Shoes from China?

20 years ago it was very economical to import safety shoes from China.

Import from China can save up to 50% of cost compared to production in Euro or US market.

A large number of foreign safety footwear giants chose to import directly from China.

Nowadays, with the reform of Chinese manufacturing technology.

Although the cost is increased, the products still very competitive, and the current price range is around $7-20 (factory price of standard safety shoes).

How do You Choose Safety Shoes in Applications?

There is a logical process for choosing safety shoes.

• Determine the risk of the job by analyzing the working conditions and tasks.
• Determine the criteria needed to protect yourself against the identified risks.
• Add personal criteria, such as anti-heat, anti-old, anti-oil, anti-acid, and anti-skid.

' In a basic workshop, choose a shoe that reaches SB, SRC, S1, or S1P SRC.

' In Heavy-duty require a sturdy boot with full standards such as S3 SRC

' In the frozen industry, in cold working environments insulated boots are top recommended.

' In the glass factory, you must choose cut-resistant protection against sharp items such as glass, nails.

' In the electric system, work boots should have an electrical hazards rating.

What is Used to Industrial Safety Shoes?

Our customers work in a variety of different areas of industry.

Different industries requirements different functional safety shoes.

Military safety boot used to military Industries

Heat resistant safety shoes used to metallurgical Industry

Anti -chemical resistant safety shoes used to Chemical Industry

Electricalsafetyshoes used in the electronics industry

Lightweight safety shoes used to light industry

S1P or S3 safety boot used in the mining industry

Welding safety shoe design with used to weld industry

Oil-resistant safety shoes are used in the oil field industry.

Cut resistant safety shoes used in the cutting or glass industry

 How to Process Safety Shoes?

Your safety shoe order mass production in our factory takes about 30 days.

The whole process from raw material to finished product.

1.Raw material quality control into the warehouse.

2.Cutting leather and accessories out of the warehouse.

3.Assigned each sewing machine department to assemble the quarter.

4.Button department punching eyelet.

5.Assemble department fit toe cap shape vamp.

6.Sole department with injection PU sole or cemented sole.

7.Packaging department to tide the lace, pairing shoes, put footbed, package color box.

What Type of Safety Shoes are Best in Wet Environments?

Safety gumboot, Water-resistant, or Waterproof safety shoes in best in wet environments.

Those types reach S3 S3 WR, S4, S5 ranting, those grade of shoes have specific waterproofing features on the upper surface and waterproof safety shoes are made of waterproof membrane Dynamic water resistance testing up to 60-120mins.

Static water resistance can also be tested.

Can Safety Shoes be Used for Trekking?

You can, for instance, use lightweight safety shoes for outdoor activities as well as protective footwear. But safety shoes for heavy industry are not suitable for a long journey

Are Safety Shoes for Women?

Women's safety shoes including white safety shoes, pink outdoor safety shoes, high-heeled women's safety shoes, these are all women's safety shoes.

Some jobs require women to operate or have women workers,  safety shoes are necessary, such as nursing, food shop packing, and laboratory.

What isSafety Boot Cerifited Issue?

All protective shoes undergo standardized tests concerning impact, compression, metatarsal, conduction rating, electrical hazards, penetration resistance, and static dissipation, this is a basic safety test requirement, you could see in as below chart is different standards in a different country.

EN, EN, EN test standard for CE

ASTM F-11/F test standard for OSHA

AS/NZS -3 test standard for CSA

What are CSA Safety Shoes?

CSA is safety shoes test standard from the Canada safety association group, founded in .

The CSA safety shoes not only test safety shoe products but also factory evaluation and test training.

After approval, each batch product will remark logo, such as CE.

As below is a test item for CSA safety shoes

1. Toe protection
2. Protective sole aboveN, Withstands 1.5 million bending cycles without cracking.
3. Electric shock resistant (ESR)
4. Static dissipative ( SD) 100k Ω~M Ω
5. Chainsaw protective
6. Metatarsal protection
7. Conductive standards 1MΩ~100MΩ
8. Slip-resistant sole

The product must pass the A, D, H protection function, the rest can be followed up with optional testing if you need it.

You can research the company name that approves CSA.

AS below is CSA product standard labels for your reference

What are ASTM Safety Shoes?

OSHA mandates protective footwear in areas having the potential danger or foot injuries.

The shoes must meet ASTM International standards.

ASTM -18 test method of safety shoe that offers a sufficient protection level.

Test a steel or composite toe protection, midsole puncture, and so on.

You can see below the test required for ASTM safety shoes

• C/75 = Compressiontest toe cap
• I/75 =Anti- Impact toe cap
• Mt/75 = Metatarsal impact
• CD = Conductive properties
• EH = Electrical hazard properties
• SD 100 = Static dissipative(1-100 megohms)
• SD 35 = Static dissipative (1-35 megohms)
• SD 10 = Static dissipative (1-10 megohms)
• PR = Puncture resistant
• M = Footwear designated for a male
• F = Footwear designated for a female

Does ASTMRequire Metatarsal Guards?

ASTM is the American Society for Testing and Materials.

Metatarsal boots are required when rolling or lifting heavy and typically metal items such as loaded drums of liquid or train wheels.

When the hazard is more significant due to sharp surfaces that concentrate or focus the weight is dropped, metatarsal guards are recommended.

The likelihood or risk of an object dropping is also a consideration.

A rule of thumb is metatarsal protection for a median weight of 65 pounds dropped less than four feet or a rolling object weighing more than 50 pounds.

What is Safety Shoes Safety CE Standards?

You always can't how to make a spec in your safety shoes products

After reading this chart, you will easily understand what spec you should pack in your safety shoes products.

Are you interested in learning more about EVA Sole Anti-Smash Anti-Puncture Slip-Resistant Safety Shoes? Contact us today to secure an expert consultation!

OB: without any safety standards the same as a normal boot.

SRC leave good for anti-slip and energy absorbing heel, like walking shoes.

SB: only with 200J safety toe cap+energy absorbing heel

S1:200J safety toe cap +anti-static sole

S2: S1+upper water-resistant +energy absorbing heel

S1P: S1+penetration resistant midsole +energy absorbing heel

S3: has the safety elements of S1P+water resistant upper

As below is the rating for the outsole

How Many Different Sole for Safety Shoes?

• PU/PU

Double density Polyurethane injection,cold-resistant-10'C

• PU/RUBBER

Double density Polyurethane rubber combine injection, reach to HRO

• PU/TPU

Double density Polyurethane TPU combine injection, cold-resistant -20'C-30'C

• EVA/RUBBER

Excellent Shock absorb, light and soft cemented sole, outsole could reach to HRO

• All Rubber

Double density rubber cemented sole cold-resistant -50'C heat resistant 300'c

• TPR

Thermoplastic rubber injection slip-resistant well but heavy the same as all rubber

How Many Different Toe Cap for Safety Shoes?

You should choose the correct toe cap for your OEM safety shoes, as below many different types of toe cap for your reference :

• Steel toe cap made of metal materials anti-impact 200J mass production pass 100%
• Composite toe cap made of PVC materials anti-impact 200J mass production pass 85%
• Fiberglass toe cap
• Carbon fiber toe cap
• Alloy toe cap

Is Alloy Toe Better than Steel Toe?

At one time, steel toe shoes were the safety champions.

Aluminum is a bit lighter but a little bulkier.

The development of better alloys has buyers rethinking the choice.

Alloy toe shoes can be safe and much lighter.

Pros and cons of steel toe shoes include:

+ Maximum protection for feet

+ Adds little cost to the shoes

• Can be heavy and irritate sensitive feet
• Conduct electricity, which makes them dangerous for electricians

Alloy toe pros and cons

+ Do not conduct electricity

+ Lighter than steel toe shoes

• Shatter under the weight of heavy equipment
• Generally, cost more than steel toe shoes

What is a European Toe Cap?

You are always asking for a European standard, in fact, a European standard toe cap has different test mothed.

A European standard is adopted by one of three European Standardization Organizations ' ETSI, CENELEC, or CEN.

Video of European steel toe safety shoe:

Which is Better Composite or Steel Toe?

Hazardous conditions with the potential for falling debris and objects or heavy impact require steel-toe safety shoes.

Composite toes have nearly the same strength as steel toe shoes, with fewer drawbacks.

It is non-metallic and can be worn through a metal detector.

For workers in airports, a composite toe is appropriate over steel toe shoes.

Composite toe is poor conductors of electricity.

Heavy-duty workers require boots with steel toe cap protection and ankle support.

Steel toes are traditional and heaviest, are not good for outdoor activity, are good for mining and heavy industry.

Are compositeToeLighter than Steel Toe Safety Shoes?

Safety shoes are made of more than just a protective toe material, so the toe is not the only measure of weight.

A lightweight safety shoe must be matched by a lightweight outsole. In addition to the outsole's puncture-resistant midsole and upper material, weight control is also important.

If the right outsole and upper material are not selected, a composite toe safety shoe will not necessarily be lighter than a steel toe safety shoe.

A pairs aluminum toe weight is 0.05KG

A pair of composite toe weight is 0.09kg

A pairs steel toe weight is 0.2Kg

Explanation of steel, aluminum, and composite toe caps:

What is a Moc Toe Safety Shoes?

A shoe with a moc toe design has a seam that runs around the top of the boot.

The 'U' shaped stitching on the toe is similar to traditional moccasins.

It provides increased comfort, flexibility, and protection.

Example of moc toes:

What is the weight a steel toe boot can withstand?

200-joule protection is the European safety specification.

It is a steel toe cap that offers more flat protection than a composite cap.

It essentially handles weights above the standard requirement.

Video showing 200-joule impact:https://www.youtube.com/embed/-bBBOUyUPHs?feature=oembed&wmode=opaque

Most steel toe shoes can withstand a weight of three tons.

Subjecting them to that kind of pressure is not recommended.

Regular work shoes that have a steel toe box withstand about pounds of weight.

How to Choose the Best Safety Shoes?

• Moderate toe cap

The feet of American workers tend to be wider than those of European workers.

There is also a difference in the last length and width.

The width of the toe cap must be suitable for your market foot.

• Breathable vamp

Materials to choose from include leather and man-made fabrics and materials.

Leather is the preferred material for the uppers of work boots and shoes, it's more breathable and strong than others.

• Comfortable insole /midsole

safety shoes with memory foam cushioned midsole is helpful due to the constant weight transfer between the ball of the foot and the heel.

A Steel shank or plastic shank midsole offers balance, comfort, and deduce painful overworked arches.

• SRC sole design

The thickness of a cleated outsole is the key to slip resistance level.

A spacious upper foot splay accommodates the interior.

What Materials ofSafety Shoes?

• Leather materials including split leather, cow suede leather, nubuck leather, horse-crazy leather, embossed leather, buffalo leather,full-grain, microfiber, canvas those are common leather style for safety shoes.
• You can choose the different thicknesses for this leather, the leather thickness from1.4-2.0mm, and you could custom leather color.
• Fabric materials including breathable mesh, cotton fabric, pigskin, fur wool, Sandwich mesh Canberra mesh,nylon mesh
• Eyelet including D-ring, punched metal plastic hook, webbing fabric, BOA rotate
• Accessories including toe cap ,midsole plate ,trap,reflective stripe,rubber logo,side zip,lace
• Insole including PU, HI-ploy, EVA+BKmesh, memory foam

What is the Feature of safety shoes?

Look for safety, health, and comfort features instead of the cheapest price.

AS below feature, you must consider

• Water-resistant &Breathable

The materials used to upper water-resistant and breathable, the lining and leather also include reinforcing materials, breathable upper won't make your feet sweat.

• Flexibility &Lightweight

Hiking safety shoes must be lightweight in order for your users to have a more comfortable experience.

• Soft Padded collars

0.8-1.0mm sponge tucked into the collar of the shoe can be better, reducing ankle chafing.

• Short break-in time

Proper inside structure design and high-quality lining materials can be important factors in determining the break-in period.

• Durability

Your end customers often use safety shoes in tough environments, purchase safety shoes must be durable.

• Abrasion-resistant &slip resistant sole

The outsole's abrasion-resistant properties increase the life of the shoe and its excellent slip resistance reduces the risk of injury from falls.

What are Safety ShoesProtective Midsole?

Midsole protection guards against objects such as nails,N penetration force is needed for footwear protection.

The protection is provided by a Kevlar insole, steel plate, or stainless steel insert.

The protective midsoles of safety shoes are typically made from one of two materials ' steel or a woven fabric like Kevlar.

steel, stainless steel recommended for a cheap price or heavy industry protecting shoes.

Steel midsoles conduct electricity, cold, and heat, more economical than fabric midsole'disadvantage is not light.

Woven fabric midsoles are also named kevlar, this midsole more light, and flexible.

You could choose one of the materials as your product's midsole.

Nail Penetration video:https://www.youtube.com/embed/BESSJl28iLM?feature=oembed&wmode=opaque

How to Design Safety Shoes?

Design the best safety shoes actually starts with the excellent design of the outsole, because the sole texture directly affects the slip resistance performance.

After done CAD design of the outsole, the shoe lasts designer starts design plastic last length and the width, match up the toe cap.

The shoe designer creates a drawing of safety shoes upper, and the pattern maker makes a paper pattern based on the plastic lasts.

How Long do Safety Shoes Last?

There are no guidelines as to how often you need to replace safety shoes.

It depends on the work environment.

Typically, safety toe shoes last in the six-to-12-month range in an average work environment.

Some last longer, others not as long.

Who Makes the Best Safety Shoes?

Safeft manufactures safety boots, work boots, hiking boots, and military boots of various types.

Safety shoes made by safeft with more than 12years' experience in producing different standards.

The company has a strong development team.

Supply for 5 top brands in Euro and South America for many years.

You can order safety shoes products with ASTM and CE certified, this is ready certified for your business.

You can see brand design comfortable steel toe safety shoes manufactured by safeft.

What is S3 SRC?

S3 SRC protection has additional marking for exceptional slip resistance.

It is a combination of SRA and SRB.

SRA is tested on ceramic tile with the wet dilution soap solution, lauryl sulfate.

SRB is tested on steel surfaces with glycerol.

What are S1 and S3 Safety Shoes?

S1 safety footwear is suitable for work indoors with no risk of water spray.

The shoes have breathability.

Work was done outdoors requiring toe protection against perforation and water spray requires s3 rated shoes.

What is Safety Shoes Price in China?

You can find many different Safety shoes price in china.

Most customers don't know why the price range such different.

Here I share with you some experience, with different raw materials, will make different price safety shoes.

Different safety shoe machines, different safety shoemaking skills, cause different cost and mass production will also make the price different.

Normal, tested safety shoes are $6-10. These prices are set at the basic model, which is the most heavily produced model.

What are Safety Shoes Required?

Manufacturing safety shoe plants must have ISO certified, and Safety footwear products are tested by authoritative testing centers and issued with test reports and certificates.

Different countries have different testing methods, but the intent of the test is the same.

It is better to provide real protection than to cause harm to your feet.

The most basic protection is to pass the smash test, the puncture test, which is mentioned in the ASTM, EN, CSA test requirements.

The metatarsal impact test is required by ASTM F-18 and CSA Z195-09

Therefore, passed test safety shoes will be marked with different certification standards on the label

Label for safety shoe export to the USA shows the C/I M,

As for safety shoes, ASTM test, only issue test report haven't certificate

LA symbol for Chinese safety shoes

CE for Europe safety shoes

UKCA for safety shoes in the UK.

These logos are based on the safety shoes that have certified.

Safety Shoes with Arch Support?

Arch support allows those with flat feet to wear them more comfortable when walking and working.

Especially army boot and trekking safety shoes more need the outsole with arch support, it is will more costly to open this kind of sole mold but more comfortable to wear.

The low-end safety shoes, we used to arch support footbeds, which provide comfort and low your purchase budget.